Chicago Industrial Reuse and Parts Blog-Newsgroup > West Chicago
> New
> Agricultural
> Combines
> New nec np 4001 50032331
New nec np 4001 50032331
A contrast ratio of 2100 : 1 is achieved using DynamicBlack and the DLP method
DLPWith the introduction of DynamicBlack , the projector delivers high contrast ratio of 2100:1 for superior image display capability, particularly to express the vivid details in dark images.
* DynamicBlack works only in 2-Lamp Mode.
WXGA chip for wide-format images
The projector's WXGA chip (1,280 ? 768) displays the same wide-format WXGA resolution images such as laptop computers and DVDs.
Dual lamp system provides high brightness of 4500 ANSI lumens. Continuous use is also possible when using a single lamp mode.
By employing a dual lamp system, high brightness of 4500 ANSI lumens has been achieved. This is sufficient when high brightness is required in large venues.
Furthermore, in the Single lamp mode, since the projector can be operated continuously by using the automatic lamp switching function, it is suitable for monitoring purposes. Lamp Eco mode is available in both the dual lamp and single lamp modes for extending the service life of the lamp.
Two types of Replaceable Colour Wheel and BrilliantColor technology project vivid images
* The brightness when using the six-segment colour wheel is about 67% of the brightness when using the four-segment colour wheel.
High connecttivity supporting several different image sources
Five types of optional lenses available for Flexible installationUnits are equipped with DVI-D, component, and RGB input/output terminals. Integrated 3W+3W stereo speakers make it possible to output sound together with images.
The power can be controlled intensively with Auto Start and Direct Power Off
The NP4001 starts projecting images automatically when electric power is supplied. Turn off the power source with a switch or a circuit breaker while projecting images or running the fan. With these functions, it is possible to completely control the power of the projector with the power distribution board.
Five types of lenses selectable for the installation environment
(Note: Lenses are not attached to the NP4001 main unit.)
Powerd lens shift mechanism for simple adjustment of projected images on screen and Keystone correction
With the powerd lens shift mechanism, the position of projected images on screen can be adjusted in both the vertical and horizontal directions without moving the main unit. Furthermore, Keystone correction corrects distortions in the vertical and horizontal directions up to a maximum +/- 35 degrees in the horizontal direction and a maximum +/- 40 degrees in the vertical direction.
Since adjustment of lens zoom and focus, as well as Lens shift and Keystone correction, can be operated by remote control, the projector need not be installed within reach of the speaker.
Recommended operating temperature range (T-T)
VGA, SVGA, XGA, WXGA, SXGA, SXGA+, UXGA
