Chicago Industrial Reuse and Parts Blog-Newsgroup > North Chicago
> New
> Industrial
> Esr / low ohms meter kit with stand
Esr / low ohms meter kit with stand
ESR/LOW OHMS METER KIT WITH STAND!
The Blue ESR meter kit is perfect for any electronics technician or hobbyist. This handy and affordable meter measures capacitor equivalent series resistance (ESR) in the circuit. ESR is a very important characteristic of capacitors greater than 1ufd. This meter makes measurements which are often impossible to check with standard capacitance meters. Includes a clear stand to simplify use.
This meter kit offers the easiest assembly on the market. All components are on the solder masked PC board, and on board diagnostics detect assembly errors. Long battery life - circuits function down to battery voltage of 5.5 volts.
*Measurement range: 0.01 to 99 ohms, auto-ranging.
*Peak voltage across capacitor under test @ full scale: 100mV.
*Update speed: 4 readings/second.
*Power supply: 9 volt battery (not included).
*Controls: Single push button for power on/off and zero.
*Dimensions: 5.75x3.5x1 inches (147x86x24mm).
*Tests electrolytics in circuit, & test leads are non-polarized.
*Test lead resistance compensation.
*Automatic power off when reading is unchanged for 3 minutes.
*Easy-to-read, high brightness 0.5 inch (13mm) piercing blue LED display.
*Chart of good capacitor ESRs on the front panel.
Kit includes all electronic parts, enclosure, solder masked pc board, labels, test leads with 4mm shrouded plugs installed, alignment and test resistors.
Assembly, including soldering, required.
