Chicago Industrial Reuse and Parts Blog-Newsgroup > North Chicago
> New
> Commercial
> Security
> Pacific scientific 200 v dc motor generator 4 hp wind
Pacific scientific 200 v dc motor generator 4 hp wind
PACIFIC SCIENTIFIC 200 V DC MOTOR GENERATOR 4 HP WIND
PACIFIC SCIENTIFIC 200 V DC PERMENENT MAGNET MOTOR. I ONLY HAVE A 24V DC OUTPUT TO TEST IT WITH AND IT RAN FINE. A LITTLE NOISY ( MIGHT NEED BEARINGS CHANGED BUT NOT TOO BAD) BUT WORKS. I RAN IT FOR MORE THAN 10 MINUTES AND NO HEAT.
THE BASE HOLES ARE ABOUT 5" X 5" APART. THE MOTOR IS ABOUT 14" LONG FROM THE REAR TO THE FACE OF PULLEY AND ABOUT 6 1/2" IN DIAMETER. THE SHAFT IS ABOUT 15/16", AND PULLEY IS ABOUT 2 3/16" IN DIAMETER AND 1 3/8" IN WIDTH, 14 GROOVES. THE FLYWHEEL IS ABOUT 9" IN DIA. AND ABOUT 2 1/8" IN WIDTH.
