Chicago Industrial Reuse and Parts Blog-Newsgroup > Each Chicago
> Scrap Metal Only
> Dynapro ergo touch screen lcd industrial computer 3010
Dynapro ergo touch screen lcd industrial computer 3010
DynaPro Ergo Touch Screen LCD Industrial Computer 3010
This is a DynaPro ErgoTouch 3010 industrial computer with a 10" COLOR LCD display and a touchscreen interface. This unit is used, in Fair-to-Good cosmetic condition with a lot of minor blemishes from use/installation/removal (see photos). This computer came to us with a dead hard drive. We replaced it with a spare (it's a standard 2.5" IDE laptop drive) and the computer booted into Windows 95 with no problems. We verified that the touch panel is working, even where it has a dig right over the display. The ErgoTouch was made to function even with heavy abrasion on the touch panel; this one blemish does not seem to affect the touch input. No other testing was done.
Dynapro ET 3010 Series A Rev. 1.0 Factory Options:
* DB-25 Serial port capable of RS-232E, RS-422A, and RS-485
* RJ-45 10Base-T (network) port
* Female DC-15 AUI connector
* External floppy drive connector
* Expansion slots (2pcs. open 16-bit 3/4 length ISA slots inside)
The ErgoTouch Computer is a small, lightweight, ergonomically-designed and environmentally-sealed interactive computer built for continuous use in harsh industrial environments. It uses PC architecture, and offers the latest in flat-panel display technology. The ErgoTouch Computer is supplied with a Near Field Imaging (NFI) Touch Screen System, which provides greater accuracy, durability,, reliability, and clearer optics than analog resistive touchscreens. The NIF touch screen never requires realignment, even across wide temperature and humidity variations. NFI touch screens can be operated with industrial gloves
