Chicago Industrial Reuse and Parts Blog-Newsgroup > Each Chicago
> New
> Industrial
> Metalworking
> North state cs-18R cut off saw 18" 7.5 hp pop up saw
North state cs-18R cut off saw 18" 7.5 hp pop up saw
You are considering a North State, 18" Cut Off Saw. This item is used, but is in good overall condition. It has been tested here and found to be in good operating condition. Comes with an extra blade. We did not receive the infeed or outfeed conveyors with this saw.
* Model No.: CS-18R (right hand model)
* Motor: 7.5 HP, 220/440 volt (wired for 220V)
Here is a brief description I found on the web on this type saw. Please use as reference only.
* Cutting off capacity (thickness x width): 2" x 12", 3" x 11", 4" x 10"
* Stripped table surface is precision ground, assuring cutting accuracy.
* Picture shown left-hand model is standard.
* Right hand model optional.
* Fast cutting rate up to 81 strokes per minute. Cycle speeds are adjustable.
* Motion cycles are pneumatically operated, and conveniently controlled by a foot switch.
* Powerful, high torque 7-1/2HP motor drive.
* 18" saw blade is optional.
* Clamp is easily adjusted for work piece thickness variation.
* Easy belt tension adjustment or replacement.
* High stability at fast cutting rates.
* In-feed and out-feed roller conveyors are optional.
* Convenient cycle speed adjustment from outside the machine is available.
* A version model CS-18A is available for cutting aluminum and acrylic material.
Cutting capacity (thickness x width)
