Chicago Industrial Reuse and Parts Blog-Newsgroup > Each Chicago
> New
> Agricultural
> Hay Baling
> Lutron ecosystem cs-1L-cm lighting network bus
Lutron ecosystem cs-1L-cm lighting network bus
An EcoSystem lighting network containing more than
one ballast, module, or driver requires an EcoSystem
Bus Supply. This supply powers one or two independent
EcoSystem busses with up to 64 ballasts or ballast
Provides power for either one or two EcoSystem Busses,
Reprograms settings of replacement ballasts automatically
Maintains redundant memory of ballast and module
programming for building sustainability
Accepts up to two normally open or normally closed
dry contact closures per bus to allow integration with
occupancy sensors, demand response inputs, or AV
Accepts one normally closed emergency input per supply
to allow integration with building management and/or
EcoSystem Bus may be wired NEC Class or
Bus wires are polarity insensitive and topology free
Voltage input: 20 / 240 / 277 V 50 / 60 Hz
Non-volatile (EEPROM) memory stores specific system
information for 0 years from power down to power
00% performance tested at factory
Allows programming via the EcoSystem Programmer.
Programming can be locked out via DIP switch
