Chicago Industrial Reuse and Parts Blog-Newsgroup   >   Cook County   >   New icom AT130 auto antenna tuner at-130 marine brand

New icom AT130 auto antenna tuner at-130 marine brand

ICOM AT130 AUTO ANTENNA TUNER AT-130 MARINE BRAND NEW
This item is available for immediate delivery
This item is brand new in unopened box
A full 12 month seller warranty is applicable to this product
Unit is brand new in unopened box
Full one year warranty is applicable
Icom AT-130 Auto Tuner for Single Sideband Radios
The versatile AT-130 can be used with a variety of vessels, even smaller boats that cannot use a long antenna element. For example, the AT-130 will match a 7 m (23 feet) long wire antenna across the marine band in the 1.6 - 27.5 MHz range.
No manual tuning is needed. Just push the [TUNE] switch on an Icom HF marine transceiver; the AT-130 adjusts the antenna and the transceiver to the minimum SWR in any frequency on an HF marine band. The AT-130 allows you to transmit with strong RF output power, and is perfect for maritime mobile operations.
The AT-130 is housed in a durable, completely weather-resistant acrylic case with rubber gaskets. This allows it to be conveniently installed near the antenna element base.
For Icom HF marine transceivers
Icom's sophisticated AT-130 easily matches Icom HF marine transceivers. The AT-130 easily interconnects with an Icom HF marine transceiver. AT-130 installation is simple. No adjustments are necessary. Just connect the control cable and antenna wire and go!
Improved tuning performance...the tune-up time is less than 3 seconds in any frequency on an HF marine band. In addition, the AT-130 has 8 convenient memories to store tuning information. Retuning for a memorized frequency takes about 1.5 seconds. This allows you quick trouble-free frequency changes.
The AT-130 emits very little output power (just 300 mW) during the tuning process. This reduces the possibility of causing interference to other stations using the frequency.
* Dimensions: 230(W) x 340(H) x 80(D) mm; 9.1(W) x 13.4(H) x 3.1(D) in (projections not included)
* Usable Temperature Range: -30 C ~ +60 C
* Rated Voltage: 13.6 V DC +/-15% (negative ground) (supplied from an Icom HF marine transceiver)
* Current Drain (at 13.6 V DC): 2 A
* Frequency Coverage: 1.6~30 MHz (with the antenna length 7 m (23 ft) or longer)
* Input Impedance: 50 ohms (unbalanced)
* Max. Input Power: 150 W (PEP)
* Input Power During Tuning: 10 W
* Auto Tuning Time: 1.5 sec. (returning for a memorized frequency), typically 2~3 sec. (when operating band has been changed)
* Auto Tuning Accuracy: VSWR 2.0:1
* Insertion Loss: 0.5 dB (with a 50 ohms load, after tuning)
A GST tax invoice will be provided to Australian purchasers via email.
radios.net.au will consider trade-ins (Amateur Radio equipment less than 10 years old). Feel free to email us with details of your proposed trade-in.
No warranty is made or given by the operators of radios.net.au in respect to the appropriateness of the gear for your intended use / purpose (ie that a IC706MK2G will save you in a marine or outback emergency) and we will thus accept no responsibility for any loss or damage you may suffer from the failure / non performance of the gear for your intended use or otherwise.
We respect your privacy. Your details will never by given to any other party.
radios.net.au is the sole Australian agent for Flex Radio and SPE Amplifiers in Australasia. We are not however agents for Icom, Yaesu or Kenwood radio companies and we thus provide our own servicing / warranty support for these brands.
Being an online business, email is our preferred means of contact. We undertake to answer all emails within 24 hours but in most cases the answer is within minutes (not hours).
We will consider trade-ins (Amateur Radio equipment less than 10 years old). Feel free to email us with details of your proposed trade-in.
No warranty is made or given by the operators of radios-net-au in respect to the appropriateness of the gear for your intended use / purpose (ie that a IC706MK2G will save you in a marine or outback emergency) and we will thus accept no responsibility for any loss or damage you may suffer from the failure / non performance of the gear for your intended use or otherwise.
(At the behest of the large radio manufacturing companies, who oppose true price competition in the radio communications market in Australia, we are also compelled to advise you of the following)
We are not an authorised agent for any radio manufacturing company here in Australasia