Chicago Industrial Reuse and Parts Blog-Newsgroup > Chicago
> New
> Tacsew tlu-563 walking foot sewing machine servo motor
Tacsew tlu-563 walking foot sewing machine servo motor
These are brand NEW Tacsew TLU-563 walking foot machines in sealed boxes. These machines are copies of the popular Juki LU-563. These machines are straight stitch with reverse. The machines are made to sew heavy material like leather, upholstery, canvas and denim. It has safety clutch for the instances when your machine gets knocked out of time. The machine uses a 2.3 capacity U class bobbin. It comes complete with the table, a table Setup DVD, 3/4 hp Servo Motor, light, drawer, needles, bobbins, bobbin winder, thread stand, and manual
1) The TLU-563N provides further enhanced durability, and comes with a walking
foot mechanism with improved feed efficiency that is 20% higher than the
conventional one. In addition, the walking foot is provided with a center rest,
thereby achieving a higher degree of accuracy, especially in the piping process.
2) The machine is best-suited for the sewing of medium- to extra heavy- weight
materials such as tents, awnings, seats, sofas, leather coats, gloves, auto seats
ceilings, car interior articles, etc.
As the walking foot and needle feed motions are transmitted to the feed dog
motion, three feed motions are unison perfectly. When several piles of cloth are
sewn together, the upper and lower sewing cloth do not slip and therefore no
puckering are formed. Walking foot stroke can be easily adjusted by loosening a
butterfly screw on the back side of the machine.
2) The improved feed of the walking foot has 20% greater efficiency than that of
conventional machines. The feed mechanism and other mechanisms have been
improved. As a result, the durability has been increased and the feed efficiency of
the walking foot is 20% greater than that of the conventional model. In addition,
the walking foot is now provided with a center rest, which upgrades the accuracy
in the piping process in particular.
3) Maximum stitch length 7 mm(9/32")
The TLU-563 can make a maximum stitch length of up to 7mm(9/32") for heavy
duty work and the stitch length can be readily regulated by pressing a push button
on the machine bed and turning the hand wheel. The stitch length, once set, never
changes during the sewing operation.
Ball bearings are used for rear bushings of main shaft and hook shaft and a timing
belt is used to connect these two shafts. This minimizes the running sound and
vibration of the machine during the sewing operation.
5) Large bobbin to assure high efficiency of reverse sewing.
For straight lock stitching, the TLU-563 is equipped with not only a reverse sewing
mechanism, but also with a large bobbin. Large bobbin improves ease of
operation. The TLU-563N model incorporates a vertical-axis 2.3-capacity hook
which reduces frequency of bobbin replacement. As a result, easier operation is
