Chicago Industrial Reuse and Parts Blog-Newsgroup > West Chicago
> Scrap Metal Only
> Miller diversion 165 ac dc tig 907005 & dlx cart/ cover
Miller diversion 165 ac dc tig 907005 & dlx cart/ cover
MILLER DIVERSION 165 AC DC TIG WELDER
W / Weldcraft LS17 Tig Torch w/built in remote amperage fingertip control
Inverter-based, AC/DC power source provides a more consistent welding arc while using less power.
Whether it s in the shop, garage or at the race track, at 50 lb it can be taken anywhere.
for non-contact arc starting that eliminates tungsten and material contamination.
provides optimum shielding based on welding amperage without waste or need for adjustment.
reduces noise and maintenance by lessening the amount of airborne contaminants
pulled through the machine, while sufficiently cooling thermally
protected internal components.
Fully adjustable amperage control
Weldcraft LS17 TIG Torch. 150 A, air-cooled torch features the hand controlled amperage
adjustment built into the handle of the torch.
provides a fast freezing weld puddle and deeper penetration.
Three Simple Steps Get You TIG'n
1 .Turn on the Diversion 165 Flip the switch. It's just that simple.
2. Select Your Metal We've labeled the metal types so you don't have to memorize the difference between AC and DC. Again, all you do is flip the switch.
3. Select Your Material Thickness See the color associated with the metal you've selected. Just turn the dial to the proper thickness based on the material you are welding.
Power source with primary cord (50 A, 230 V plug, attached)
TIG 12.5 ft (3.8 m) torch with backcap, ceramic gas cup,
3/32 in (2.4 mm), collet and collet body, and 2% ceriated tungsten
With a built in fingertip control on the torch
12 ft (3.7 m) work cable and clamp
Argon regulator/flow gauge with hose
TIG Welding for Dummies book with content written by Miller
Welding project blueprint for a machine cart/cylinder rack
* DC: 150 A at 16 VDC, 20% Duty Cycle
* AC: 150 A at 16 VAC, 20% Duty Cycle
